Shrink Wrap Packaging, Product Shrink Wrap, L-Bar Sealers and Shrink Tunnels

A lot of folks find out that they have confused shrink wrapping and stretch wrapping. We have a guide below to make sure that you select the right film for your application.

If you are using shrink wrap, then you are forming the wrap around your product with the ultimate goal of shrinking the film so that it conforms to the product's individual look and feel. If this is what you are looking for, then continue below for more information. If not, we recommend you look at our plastic wrapping equipment.

To start your shrink wrapping process, you are going to need to have shrink wrapping equipment, shrink wrap, and products to wrap up. Shrink wrapping is similar to vacuum packing a product, but has a more clear and professional presentation than vacuum bags do.

A shrink tunnel typically works by encasing the product in a film, cutting/sealing the sides and then passing the product through a heat tunnel to make the film shrink around the product, giving it a professional looking seal and presentation.

This shrink tunnel is one our best sellers and is our Damark LSR-1 Shrink Wrapper. These machines are built to last and are economically priced. Our Damark line of shrink wrapping systems are available in three levels of automation. Each level stabilizes quality, brand name components and craftsmanship resulting in a shrink packaging system designed and built to give many years of reliable service.

This featured shrink wrapper is a top of the line model. It is also our best seller as it has all the components ready for action to get you started in shrinking your product for a professional presentation.

Also needed for shrink wrapping is the shrink wrap film itself. This film is generally made of a higher grade polyolefin mix that is put onto rolls in in lengths up to 7000'. PTI offers a full line selection of shrink wrap films for your shrink wrapping applications.