Trusted CleanŽ Wax & Finish Remover
Blast - Mop On - 2 Gallons/case
PTI Price: $27.00
NOTE: An extra $20.00 shipping charge has been made to the cost of this item and will not be charged again
Trusted Clean Blast is a floor finish stripping solution, which easily and quickly cuts through heavy build-ups of floor finishes, seals and other fortified coatings for fast, effective removal. A synergistic blend of special penetrating agents quickly liquefy floor coatings, including those which have been burnished. Alkaline builders dissolve both seals and finishes for their complete removal from the floor. Floors are stripped clean and ready for refinishing quickly with a minimum of time and effort. Low foaming, excellent for use in automatic scrubbers. Take a look at our resource center for instructions on how to strip a floor.
Proportioning Chart:
Light Build-Up:1 part to 10 parts of water
Medium Build-Up: 1 part to 6 - 8 parts of water
Heavy Build-Up: 1 part to 3 - 6 parts of water
Caution: Due to the power of this floor stripper and seal remover, it is recommended that Blast not be used for purposes other than stripping. It may damage painted walls, woodwork and some older floor tiles. Test floor tiles to be sure color bleeding and damage does not occur.
Use with any temperature of water. Best results are obtained using warm to hot water.
Read label for complete use directions, cautions and warnings.
Use appropriate Personal Protective Equipment (PPE)
MSDS Sheet available upon request.
|
