Trusted CleanŽ Wax Floor Stripper
Easy Lift SC - 6 quarts/case
PTI Price: $64.68
Use to remove floor waxes; acrylic, styrene, polymers, co-polymers, oligimers, and metal cross linked finishes. Also acrylic and water based urethane sealers.
Directions:
Read all cautions and directions before using this product. It contains alkaline ingredients normally found in powerful strippers. Quick penetrating agents and liquefying ingredients require that this product be used according to directions.
Do Not Use Undiluted:
Pre-test on a small area. Dilute at 1 part stripper to 20 parts water. Use hot water. Mop onto floor and allow to set 3 or 4 minutes. Do not allow stripper to dry on floor. Keep floor wet. Mop area again to agitate and loosen finish. Use floor machine & stripping pad. Picking up loosened finish is most effective with a wet vacuum but may also be mopped off the floor. Rinse surface thoroughly with clean water. Use a neutralizer to remove remaining residue after rinsing. Apply finish in normal manner.
Attention:
On old linoleum, rubber and asphalt floors do not use an over concentration of solution or bleaching or discoloring may occur. Test a small area using a solution no stronger than 1 part of stripper to 10 parts of water. Adjust concentration to strip effectively without harming floor substrate.
MSDS Sheet available upon request.
|
