Stretch Wrappers | Cousins 550 PUP Stretch Wrapper

Cousins 550 PUP Stretch Wrapper
ID: COU-550PUP
Price:
$4390.00



	For more information about ordering this item, please contact us.

To order, for more information, or for QUANTITY DISCOUNTS please contact one of our experienced packaging representatives at 800.472.0067 or our Equipment Manager, Bob Schymanski.

The Cousins 550 PUP is a dependable entry level machine designed for medium duty 3000# load applications. You can choose from the manual version where the operator controls the complete wrap cycle by selector switches or choose the semi-automatic model that allows the operator to set the wrap parameters and walk away while it wraps

Model	Description	Price
LP 550-SA	Semi-Automatic	$4,790 w/o Ramp
Includes top/bottom wrap timers and cycle start button so the operator can walk away while the load is being wrapped. The film carriage up travel is controlled by an adjustable limit switch that the operator needs to position properly prior to initiating cycle start.
LP 550-SAP	Semi-Automatic with Photo-Eye	$5,390 w/o Ramp
Same as the above semi-automatic model except it includes the automatic load height sensor (photo-eye) that controls the film carriage up travel by automatically finding the top of the load and stopping the carriage in the proper location for pre-selected top wraps

PRODUCTION SPEED:
1-15 loads per hour
NOTE: Process rates will vary with load size; number of wraps & forklift load/unload time

LOAD CAPACITY:
Maximum load weight: 3,000# dynamic – 8,000# static
Maximum load size: 48" W x 48" L x 75" H (68" Max. load diagonal)
NOTE: Maximum load size shown is the largest load PUP will wrap – no exceptions

TURNTABLE:
57" Diameter 5/16" thick laser-cut steel plate
18 point turntable support system
Turntable height 2-1/4" from floor
ANSI # 50 Direct Chain Drive c/w chain tensioner
1 - 9 RPM rotational speed c/w soft start acceleration
1/3 HP VDC variable speed gear-motor
Safety surround ring encloses turntable

FILM CARRIAGE ELEVATOR:
1/8 HP VDC variable speed gear-motor
Direct flat belt drive system
4 point "V" wheel carriage guidance system with side thrust rollers

FILM CARRIAGE:
Manual Friction Disk Brake Tensioning System
Accepts standard 20" wide x 10" diameter film rolls (max.)
Accommodates Hand-Wrap Rolls down to 12" width without re-adjustment

CONTROL FEATURES:
Simple to operate
Power On / Emergency Stop Button
Turntable Jog / Run Switch
Film Carriage Lower / Raise Switch
Film Carriage Variable Speed Control
Turntable Variable Speed Control
Non-proprietary UL/CSA approved components

STRUCTURAL FEATURES:
Formed steel base construction
Formed steel metal tower
Forklift truck portable base design – pick-up angles included

ELECTRICAL INPUT REQUIREMENT:
115 Volts 1 Phase 60 Hz 10 Amps

OPTIONS:
40" L x 60" W Tapered Ramp for manual pallet jack loading......$650.00
24" Long Porch Extension for powered pallet jacks....................$525.00
40" Long Porch Extension for powered pallet jacks....................$690.00