Product Information:
 Download your Double Tamp Label Printer and Applicator quote online!
Available Options:
- 305 dpi print resolution
- "H" floor mounting stand
- Direct thermal
- Low media signal alarm beacon
- Printer selection (Sato, Zebra, Datamax)
- Label generation software available
- Left-hand feed printer
- Yoke stand included as standard
Machine Dimensions:
- Length: 46 3/8 inches
- Width: 18 3/4 inches
- Height: 24 3/16 inches
- Weight: 100 pounds
Label Requirements:
- Width: 1 inch - 5 1/4 inches
- Length: 1/2 inch - 14 inches
- Roll Outside Diameter: 11 7/8 inches & 15 7/8 inch optional
- Core Diameter: 3 inch & 4 inch for labels over 6 inches, 6 inches optional
- Finish: Pressure sensitive die cut with 1/8 inch gap
|
Features:
- Print and applies a corner wrap, dual tamp, front-side-back only label
- Can apply labels to bottom edge of product
- Up to 16 inches/second dispense speed based on printer selection
- Yoke stand included as standard
Air: 60 PSI at .5 CFM while dispensing
Electrical: 115-230 volts; 50/60 cycle; 5 Amps
|
The Loveshaw® LX-800/DT is a double tamp label printer and applicator designed for
integration into automatic print/apply labeling applications. Labels can be applied using multiple mounting strategies to cases, pallets or product. High quality bar code, text and graphic images are easily printed then applied using the LX-800/DT. If you are looking for reliable and durable Label Applicators to print and apply labels accurately, then look no further than the LX-800/DT. This machine has the ability to print and apply labels on almost any panel or combination of 2 panels, including corner wrap. Simply press a couple of buttons on the microprocessor driven controller and the LX-800/DT gives you the power to choose between multiple application methods - all in one piece of equipment, something most other Labeling Equipment cannot offer. If you are looking for a versatile, reliable an accurate dual tamp labeler, check out the Loveshaw LX-800/DT.
|
