|
MP-3 L-Bar Sealers offer a large 14" x 18" seal area with a minimal voltage impulse
sealing system and solid-state temperature control. Easy load, adjustable film
cradle and an air venting device are standard. The MP-3 sealer also features a powered product
output conveyor.
Shrink Tunnels feature 16" wide x 24" long x 7" high heat chambers with a powered
package discharge conveyor. The dual blower motor / heater system offers maximum
hot air static pressure and accurate solid-state temperature control. This
MP-3 shrink machine has astandard top, side and bottom heat vent to insure
high end performance with all shrink films.
Technical Specifications:
| |
MP-1 |
MP-2 & 3 |
| Electrical: |
220V/1PH/15A |
220V/1PH/16A |
| Film Width: |
18" max. |
18" max. |
| Unit dims: |
79L x 30W x 22H |
79L x 30W x 52H |
| Shipping dims: |
83L x 32W x 30H |
83L x 32W x 56H |
| Shipping weight: |
250 lbs. |
300 lbs. |
Features:
· Wraps 10 to 12 packages per minute
· Large 14" x 18" sealing capacity
· Welded steel one-piece seal jaw
· Low voltage impulse sealing system
· Electronic solid-state temperature control
· Electro-magnetic seal jaw hold down
· Roller perforator air venting device
· Easy load film cradle
· Stainless steel product loading tray
· Tunnel chamber 24"L x 16"W x 9"H
· Variable speed Teflon mesh belt conveyor
· Dual blower motor / heater system
· 3200 Watt heating capacity
· Electronic solid-state temperature controller, holds +/- 3 degreed
· Unique 10-year heater warranty
· Top, side and bottom heat vents
· System works with all shrink films
· Welded schedule 16 sheet steel console stand construction
· No tools required for changeover
· Adds variable speed L-sealer package discharge conveyor to MP-2 features
We have the Maxi-Pak manual online as a free download!
 
|
