|
MP series L-Sealers have a sizeable 14" x 18" sealing area with low voltage impulse
sealing system. This includes a solid-state temperature control. This MP-2 L-Bar sealer is easy to load with an adjustable film
cradle and an air venting device. The MP-2 also comes with a conveyor that brings the produc tout of the tunnel.
Shrink sealers feature 16" wide x 24" long x 9" high heat chambers. The dual
blower motor / heater system offers maximum hot air static pressure and accurate
solid-state temperature control. MP-2 and MP-3 model Shrink Tunnels have standard
top, side and bottom heat vents to insure top performance with all shrink films.
Technical Specifications:
| |
MP-1 |
MP-2 & 3 |
| Electrical: |
220V/1PH/15A |
220V/1PH/16A |
| Film Width: |
18" max. |
18" max. |
| Unit dims: |
79L x 30W x 22H |
79L x 30W x 52H |
| Shipping dims: |
83L x 32W x 30H |
83L x 32W x 56H |
| Shipping weight: |
250 lbs. |
300 lbs. |
Features:
· Wraps 8 to 10 packages per minute
· Large 14" x 18" sealing capacity
· Welded steel one-piece seal jaw
· Low voltage impulse sealing system
· Electronic solid-state temperature control
· Electro-magnetic seal jaw hold down
· Roller perforator air venting device
· Easy load film cradle
· Stainless steel product loading tray
· Tunnel chamber 24"L x 16"W x 9"H
· Variable speed Teflon mesh belt conveyor
· Dual blower motor / heater system
· 3200 Watt heating capacity
· Electronic solid-state temperature controller, holds +/- 3 degrees
· Unique 10-year heater warranty
· Top, side and bottom heat vents
· System works with all shrink films
· Welded schedule 16 sheet steel console stand construction
· No tools required for changeover
We have the Maxi-Pak manual online as a free download!
 
|
