|
Maxi-Pack Manual Tabletop System
Shrink Tunnel Heaters are covered by Damark's unique 10 year warranty.
Freight is F.O.B. Shipping Point
PTI Price: $5375.00
To order, or for more information, please contact one of our experienced packaging
representatives at 800.472.0067.
FOR QUANTITY DISCOUNTS CONTACT ONE OF OUR REPRESENTATIVES, OR CONTACT Bob Schymanski
at bschymanski@pti-1.com.
These ruggedly built, economically priced shrink packaging systems are available
in three levels of automation. Each level features quality, brand name components
and craftsmanship resulting in shrink packaging systems designed and built to
give many years of reliable service.
MP series L-Sealers offer a large 14" x 18" seal area with low voltage impulse
sealing system and solid-state temperature control. Easy load, adjustable film
cradle and an air venting device are standard. MP-2 and MP-3 L-Sealers include
a stainless steel product loading tray. MP-3 models feature a powered product
discharge conveyor.
Shrink Tunnels feature 16" wide x 24" long x 7" or 9" high heat chambers. The
dual blower motor / heater system offers maximum hot air static pressure and
accurate solid-state temperature control. MP-2 and MP-3 model Shrink Tunnels
have standard top, side and bottom heat vents to insure top performance with
all shrink films.
Technical Specifications:
| |
MP-1 |
MP-2 & 3 |
| Electrical: |
220V/1PH/15A |
220V/1PH/16A |
| Film Width: |
18" max. |
18" max. |
| Unit dims: |
79L x 30W x 22H |
79L x 30W x 52H |
| Shipping dims: |
83L x 32W x 30H |
83L x 32W x 56H |
| Shipping weight: |
250 lbs. |
300 lbs. |
Features:
· Wraps 4 to 6 packages per minute
· Large 14" x 18" sealing capacity
· Welded steel one-piece seal jaw
· Low voltage impulse sealing system
· Electronic solid-state temperature control
· Electric air venting device
· Easy load film cradle
· Tunnel chamber 24"L x 16"W x 7"H
· Variable speed silicone rubber belt conveyor
· Dual blower motor / heater system
· 3200 Watt heating capacity
· Unique 10-year heater warranty
· Top and side heat vents
· System works with all shrink films
· Welded schedule 16 sheet steel construction
· No tools required for changeover
|
