To order, or for more information, please contact one of our experienced packaging
representatives at 800.472.0067.
FOR QUANTITY DISCOUNTS CONTACT ONE OF OUR REPRESENTATIVES, OR CONTACT Bob Schymanski
at bschymanski@pti-1.com.
COUSINS PACKAGING INC. Series 4100T semi-automatic
overhead rotary arm spiral stretch wrap systems will wrap up to 30 loads per
hour, maximum load size 50" W x 50" L x 90" H. Load weight is unlimited – based
on floor capacity. Our "Rapid Thread" power
pre-stretch 20" film delivery is one of the safest, easiest to load, and operator
friendly systems available. Series 4100 Titan "Simply
Better" systems include rotary arm speeds up to 12 RPM, easy to use controls,
separate top and bottom wrap counters, variable speed controls for rotary arm
and film carriage drive motors, automatic load height sensor (ALHS) photoeye,
standard industrial type push buttons, relay control logic, NEMA 12 enclosures,
and electro-static powder coated paint finish. Standard electrical input requirement
is 115V 15 Amps. All Series 4100 systems are protected by our standard 3 year
warranty policy. Many standard options are available to adapt the Series 4100
to most applications. Special options are available upon request. (Model
4100-FSU shown)
| Model |
Description |
Production Rate |
Floor Space |
Price: |
| 4100T-WM |
Wall Mount |
1 – 30 LPH |
132" D x 128" W |
$12,700 |
| 4100T-PM |
Post Mount |
1 – 30 LPH |
132" D x 128" W |
$13,000 |
| 4100T-FS3 |
Free Standing (3 legs) |
1 – 30 LPH |
144" D x 128" W |
$14,700 |
| 4100T-FSR |
Rear-Supported Free-Standing Floor Mount Unit |
1 – 30 LPH |
|
$14,000 |
|
PRODUCTION SPEED:
1-30 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
LOAD CAPACITY:
Maximum load weight: Unlimited (Floor Supported)
Maximum load size: 50" W x 50" L x 86" H (71" Max. load diagonal)
ROTARY ARM:
Double flange bearing support system
Twin V-belt drive pulleys with belt tensioner
1-12 RPM rotational speed c/w soft start acceleration
Final Revolution Deceleration and positive stop alignment
1/2 HP DC Rotary Arm Drive Motor
FILM CARRIAGE ELEVATOR:
1/2 HP DC variable speed motor
Direct flat belt drive system
Maintenance free 12 point carriage guidance system
FILM DELIVERY SYSTEM:
Rapid Thread ™ 20" capacity pre-stretch film carriage
1/2 HP DC variable speed motor
Fully electronic dynamic dancer corner compensation
Pre-stretch ratio variable by easy sprocket change
33 to 313% fixed stretch capability (shipped fixed at 207%)
Rapid Thread ™ (Safety Door) with auto power cut-off switch
|
CONTROL FEATURES:
Simple to Operate
PANASONIC PLC
Power Off – On – Reset Switch & Power On Indicator Light
Single button Auto Wrap Cycle Start/Pause
Cycle pause for applying top sheets
Base or top wraps first program
Reinforce wrap control for mid-wrapping
Up only or up/down wrap program
Emergency Stop Button
Rotary Arm Jog Button
Film Carriage Lower/Raise Switch
Film Tension (Force-to-Load) Control
Separate Film Carriage Raise & Lower Speed Controls
Automatic Load Height Detection photo-eye
Separate 1 to 9 Revolution Top & Bottom Wrap Control
Rotary Arm Obstruction Emergency Safety Stop Sensor
Rotary arm and film carriage elevator dynamic braking system
NEMA 12 control panel
Non-proprietary UL/CSA approved components
STRUCTURAL FEATURES:
All structural steel construction
Integral structural steel wall/floor mounting stand
Electro-static powder coated paint finish
SAFETY FEATURES:
Rotary Arm Obstruction Emergency Safety Stop Sensor
ELECTRICAL INPUT REQUIREMENT:
115 Volts 1 Phase 60 Hz 15 Amps
|
|
