|
To order, for more information, or for QUANTITY DISCOUNTS please contact one of our experienced packaging representatives at 800.472.0067 or our Equipment Manager, Bob Schymanski.
Cousins Packaging Inc. introduces the new HP2100X Series semi-automatic high profile turntable. The X model at $7,990 is a heavy duty semi-automatic machine with advanced standard features that offer many benefits in terms of savings, productivity and safety. The 4000# capacity turntable is built rugged to withstand extreme forklift activity and the PLC control allows for expanded programming that gives the operator the necessary options to get the job done correctly
Each Series HP 2100X is completely pre-wired, tested and quality inspected prior to shipment to meet our tough, quality engineered and manufacturing standards. The HP 2100X is designed to operate and provide 100% "up-time" accepted production performance guarantees with a minimal floor space of 106" D x 102" W.
PRODUCTION SPEED:
1-30 loads per hour (Single Turntable)
1-40 loads per hour (Dual Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
LOAD CAPACITY:
Maximum load weight: 4,000# dynamic 17,000# static
Maximum load size: 50" W x 50" L x 87" H (71" Max. load diagonal)
TURNTABLE: (Same for Dual Turntables)
48 Octagonal, 5/16 thick, formed steel plate
4 point caster support system
Turntable height less than 11 from floor
ANSI # 50 Direct Chain Drive c/w Chain tensioner
3-15 RPM rotational speed c/w soft start acceleration
1/2 HP DC Drive Motor
Final Revolution Deceleration and positive stop alignment
Front and back forklift ports for easy movement
Accu-Count exact turntable positioning system for additional film savings!
FILM CARRIAGE ELEVATOR:
1/2 HP DC variable speed motor
ANSI #40 direct chain drive c/w shock dampeners
Maintenance free 12 point carriage guidance system
FILM DELIVERY SYSTEM:
Rapid Thread 20" capacity pre-stretch film carriage
1/2 HP DC variable speed motor
Fully electronic dynamic dancer corner compensation
33 to 313% fixed stretch capability
Pre-stretch ratio variable by easy sprocket change |
FILM DELIVERY SYSTEM (continued):
Rapid Thread (Safety Door) with auto power cut-off switch
Carriage descent obstruction shut-off device for additional safety
Side mounted film carriage for operator convenience and safety
CONTROL FEATURES:
Simple to Operate
PANASONIC PLC
Power Off On Reset Switch & Power On Indicator Light
Single button Auto Wrap Cycle Start/Pause
Cycle pause for applying top sheets
Base or top wraps first program
Reinforce wrap control for mid-wrapping
Up only or up/down wrap program
Emergency Stop Button
Turntable Jog Switch
Turntable Left/Right Switch (for dual turntable systems only)
Film Carriage Lower/Raise Switch
Film Tension (Force-to-Load) Control
Separate Film Carriage Raise & Lower Speed Controls
Variable Turntable Speed Control
Automatic Load Height Detection Sensor (2 sensors provided with dual turntable system)
Separate 1 to 9 Revolution Top & Bottom Wrap Control
NEMA 12 Enclosure
Non-proprietary UL/CSA approved components
STRUCTURAL FEATURES:
All structural steel construction
Forklift truck portable base structure design lifting tubes included for front and rear access
Structural steel H-beam machine tower
Electro-static powder coated paint finish
ELECTRICAL INPUT REQUIREMENTS:
115 Volts 1 Phase 60 Hz 15 Amps |
OPTIONS:
Interface touchscreen, additional operator control options & enlarged machine tower.......
..$1,360.00
(Note: The 110 load height capability extension for the MX model is $990.00)
Full automation using our Model MX-A with A-Arm technology
...only an additional $3,360.00
At 25 loads/day the labor savings with this option will be approximately $4,100.00 annually.
If you are hand wrapping add $2,500 film savings and the total annual savings will be $6,600.
It also eliminates the need for the operator having to get on & off the lift to operate the machine.
This option pays for itself in less than 9 months!
Dual turntables - add a second turntable to increase production rate and reduce handling
.......$3,700.00
Available only on the HP 2100X at this price.
Starter spare parts kit...............................................................................................................$950.00
Tower extension for 110 wrap height capability (standard is 80)................................
.........$800.00
NOTE: All machines with tower extensions will be hinged and shipped knocked-down
Platform Scale 8ft x 3ft c/w Digital Weight Indicator (OPSCHP)...............................................$5,540.00
Built-in Load Cells c/w Digital Weight Indicator (OSCBI-X).....................................................$6,190.00
SUPER RAPID THREAD 20 film carriage..............................................................................$600.00
|
